Monday, November 3, 2008

Fun with Shrinky Dinks Pt. 2: Barrettes!

While browsing the jewelry aisle at the local big box craft store for my wine charms (& thus with shrinky dinks on my mind), I saw some barrette clips & inspiration hit. It took a while of trial & error to hit on the correct measurements to fit the barrettes (ended up with a White
Shrinky Dink strip of 1" x 5 1/2" for this size barrette). Next, I used a 1/4" hole punch (to thread ribbon through) close to either end of the strip & rounded the corners.

Then I decorated the strip with various stamps (the Christmas trees are re-purposed Birthday party hats from "Party Hearty" by the way). I just used craft ink. On a few barrettes not pictured, I stamped ballet slippers in Staz-on Black & then colored in with markers since I didn't have the right pink in a permanent marker. The water-based dye beads up which creates an interesting polka dot look. That's okay with the small images produced because it still gives an overall pink color but for larger images, I'd splurge for the $1.99 permanent marker :-) I also found that simple shapes worked best since they shrink so small. I tried one intricate pattern & colored it in with permanent markers. However, it was all lost when the image shrunk & everything just blended together. When choosing colors, also remember that the color gets darker or more intense when shrunk.

Once the strip was stamped, it was time to shrink. I simply used my heat tool, holding down one end with a craft tweezer in one of the holes. This also took lots of trial & error because the long narrow shape was very tricky to shrink without it twisting & folding up on itself (& thus getting stuck & ruined!) The best I can describe the winning technique is to start on one end & let it shrink about a third of the way then switch sides. When the strip is shrunk, quickly flip it over & put the barrette onto the back of it. Then, with one side pressed down, pull the other side of the strip up to touch the barrette. You need to do this step quickly so that the strip forms to the curve of the barrette before cooling completely.

Before attaching the strip, I added an optional step of embossing the whole thing. I pressed the strip onto a Versamark pad & then scooped Iridescent Ice Embossing Powder over it. Then, I used my Heat Tool to melt the powder. If you do this too long, the strip will straighten out again. If this happens just re-shape it with the barrette as described before.

Finally, I attached the strip by first putting some Crystal Effects on the barrette & laying the strip down on the barrette with the holes on the strips & barrette lined up. When it was dry, I threaded the ribbon through the holes & tied a bow on each end (this helps the strip more closely fit against the barrette since the shape will not be perfectly contoured). My packaging, once again, is SU!'s exclusive Top Note Die.
Share/Save/Bookmark

5 comments:

  1. These are darling! What a great use of Shrinky Dinks! Welcome to SCS Group 5!!
    ~Jenn

    ReplyDelete
  2. I LOVE shrinky dinks! What cute barrettes! Really enjoying your blog!

    Amy J

    ReplyDelete
  3. Cute, cute CUTE! Have to break out my shrink plastic again! Just joining here from SCS Bloggers Group 5. LOVE your blog! (aka stampin8mom)

    ReplyDelete
  4. Oh these are adorable! What a fantastic idea! :)

    ReplyDelete