More Resin Discussion

A reader sent me some good questions about Magic Glos vs. Colores Doming Resin and doming effects so I thought I’d address resin a little more.

To answer her question on whether I tried it on paper as opposed to just over Diamond Glaze--I did try just the magic glos on a paper item about 5/8" in diameter. I had to do several layers to get the thickness and "dome" effect I wanted. I don't remember bubbles being a problem with that but I still felt like I had to babysit it--maybe I'm just paranoid.  However, it eventually cracked! I've never had Colores crack on me.

There should be time to catch initial bubbles if you first work in the shadows before moving into the sun--but once in the sun, magic glos does cure fairly quickly.  John Golden has a good video up on youtube using magic glos & he had bubble issues--it's interesting to watch his system--he also has a video on using Easy Cast Resin.

She wanted to know if I had to do several layers with Colores to get the doming effect.  I only do one layer, one last check for bubbles (blowing lightly through a straw will take care of most of the bubbles), cover with a box to keep out stray particles & leave overnight to cure. I usually mix 15 or 30mm worth of resin (1/2 or almost 1 medicine cup respectively) & do a bunch of jewelry pieces at once to save on the cups, sticks & gloves. You can definitely make more pieces for your money with Colores than with the magic glos.  Of course, if you only plan to make a few items for gifts, personal use (not necessarily to sell), then it might be more of an investment since Colores only has a shelf life of six months.

But back to the doming--I personally think the doming works better on flat surfaces. Everyone always asks me how I keep it from running over. The short answer is: surface tension. As long as you add a little at a time (and you’ve mixed it well and with two equal parts), you can bring it to the edge and it won’t go over. If you use a bezel cup you have to keep adding more to get the dome-- to the point where you think you're about to spill over--but you really won't because of surface tension if you're careful. That said, don’t be surprised if your “cup runneth over” a few times before you get the hang of it!

If you really love the big bubble look, I’d recommend finding bubble glass (can be found on etsy) to put on top  because you really won’t get THAT much height with a doming resin.

More Resin Discussion

Easter Bunny Scrabble Tile Pendant

In honor of Easter (& because someone requested a "bunny or egg or something"), I made a special Easter Bunny Scrabble Tile Pendant. Isn't he cute??

Since I discovered I could color my wood Scrabble tiles (my last post), it made it a lot easier to be able to create this right on the tile as opposed to on a piece of cardstock, punch it out, seal it & fit it securely on the tile. First I colored the whole tile in a white chalk ink (drying with a heat gun between about three layers of ink). Then I stamped the bunny in black Staz-On. To get the blue sky and little bit of green grass, I just used a Fantastix dipped in chalk ink. Then I added the little Swarovski crystal and my Colores resin on top. I couldn't seal it with Mod Podge like I would with paper because it smudges the chalk ink I've found. But the resin doesn't seem to affect chalk ink like it does alcohol inks.

By the way, if too much ink gets on the side of your pendant, rubbing alcohol should remove it.

Easter Bunny Scrabble Tile Pendant

Game Piece Charm Bracelets

I made a great discovery a few weeks ago--You can color wood with alcohol inks! I can't believe it took me this long to try it. The results aren't as bright as paper or plastic, but I liked them enough that it gave me the idea of using scrabble tiles colored that way as a bracelet focal point. I simply glued earring bails onto both sides to connect the bracelet chain. Regular bails would work too. I also made some using small dominoes.

And one last pic--my favorite mini domino ring to match the blue wave bracelet--all to be posted in my shop soon:

Game Piece Charm Bracelets

I Like Big Rings & I Cannot Lie

Inspiration can find me in the strangest places--the latest one came in the ER when I took my youngest in over a weekend for an ear infection. The nurse had a big mama-jama ring on her finger & it looked so cool & funky, it made me want to make a bigger ring. I've been keeping it rather conservative with 5/8" round rings.

So, I came up with making rings with my mini-dominos! I hope they fill a need for people who like big rings :-) They're 1/2" x 1"-- so not ginormous, but still a little more funky.

A few samples now in my store:

 

  

 

I Like Big Rings & I Cannot Lie

Versafine vs. Staz On vs. Chalk Ink

Recently, I ran into a problem getting a good image and sealing a jewelry project that mixed types of inks. I have all kinds of different ink pads, as you can imagine, & I've been using black Staz On for most of my jewelry projects but I ran into some problems using it with some keychains lately. 

I was trying to stamp a larger stamp image in Staz On over some Chalk Ink but when I pressed hard to make sure the whole image came through, I found it "dug into" the chalk ink, sort of removing some of the chalk ink. Plus the image wasn't as clean as I like it. Then, when I covered it in resin, it also ran a little. Normally, I don't have that problem, but I'm guessing it was because the chalk ink wasn't completely dry & the image is larger than I usually work with. You can see below how the top line is a little smudged & I had to color in the "eis" with a sharpie because the Staz On didn't give me the best image (I didn't want to press too hard & mess up the chalk ink as I'd been doing in numerous other tries).

I've also found that Staz On runs when you try to use a spray sealer instead of resin. I tried sealing with Mod Podge first but that also removes the chalk ink. Mod Podge will work fine with Staz On by itself or with alcohol inks & then you can spray or use resin with no ink running. So, I set about finding either a sealant that worked with both Staz On and chalk ink or finding a replacement for the Staz On.

What I found was Versafine, a pigment ink, by Tsukineko. I read somewhere it was good for detailed images so I decided to check it out. First off, I was very happy to see that it gave me a complete image on the very first try and didn't take off any of the chalk ink at all! Then, I made a VERY cool discovery--when stamped onto Staz On ink, you can wipe it off taking the Staz On ink with it and get a resist embossed effect without even embossing. It doesn't dry on non-porous surfaces so it can wipe off or you can emboss with it. The first pic shows the crisp image it made over chalk ink. The second pic shows the resist embossing on Staz On.

 

  

So, yeah, I'm a huge fan of the Versafine!! I'll still need Staz On for stamping on Staz On (I did try clear embossing the Versafine on Staz On but it muted the black color). But for Chalk ink, the resist emboss effect, & regular embossing, Versafine is the way to go.

By the way, these keychains are on the back of crayola dominos I found in a thrift store.

 

Versafine vs. Staz On vs. Chalk Ink

American Girl Doll Matching Pendants

For my daughter's 6th birthday last week, we got her her very first American Girl doll, not an investment to be taken lightly, I might add. We ended up getting her Lanie, the doll for 2010 because well, she's so pret-ty! Plus, our Maddie is an outdoor kind of girl and so is the Lanie character.

Anyway, I came up with this idea of making matching pendants for Maddie & her doll. I'd gotten a shipment of mini-dominos in that weren't like my usual ones--I was able to break them in half! I can't use them for mini domino pendants of course but serendipitously, the half-domino is the perfect size to be a mini "Scrabble" pendant. Very cool. For the bail, I found these cute flower charms to glue on. Since the chains had to be a smaller size, I chose ball chains that can be easily cut to any length you want and used simple connectors for the clasp. (The doll's chain is 9" and the girl's chain is 14"). I was even able to use the same color rhinestone in large & mini sizes. I've officially added them to my webstore now :)

Maddie chose her background paper, I stamped the monograms in black and here you go:

 

Maddie & her doll:

 

She happened to have a similar dress as Lanie already--kismet!

American Girl Doll Matching Pendants

Looking for Celtic Stamps??

So we've been snowed in for let's see...6 days now.  Today I was out shoveling the driveway so my husband could make it into the garage okay & it literally felt like I was in the Arctic--howling wind blowing snow in my face. I live in Virginia..riiiiight.

Anyway, so I've had lots of time to putz around--today I completely re-arranged my craft area work space to be more geared towards jewelry-making instead of scrapbooking (which I hope to get back to someday). Then, I've been shopping online for fun. I'll be vendoring at my daughter's Irish Dancing School's Feis (dance competition) in a few weeks so yesterday I called Highlander Celtic Stamps to place an order for more, what else, celtic stamps, because I was having internet issues and it was so nice to reach a human being.

I'm usually not very chatty with strangers, despite being from the tourist mecca of Williamsburg, VA, where we all grew up doing service industry jobs, but I couldn't resist telling the woman on the phone that I make jewelry with their stamps. Well, it turns out I was talking with the designer of the stamps herself and it's a family-owned business. Her husband is an award-winning children's author who writes Scottish stories (I *heart* Scotland--studied there for a spell). She actually visited my website while we talked & it was cool to be able to share what I do with her work--I hope it gives her the kind of satisfaction I get when I see someone wearing something I made. Here's a scrabble tile pendant I made with her Irish Dancer stamp:

Can't wait to get my new stamps!! 'Course, I'd be happy just to get the mail & newspaper too in this snow.

Looking for Celtic Stamps??